How many words is a 5-minute speech?
About 900 words at an average read-aloud pace of 183 words per minute, or roughly 650–800 words if you speak slowly and leave room for pauses.
Published November 4, 2026
The quick answer
A 2019 meta-analysis by Marc Brysbaert put the average rate for adults reading English aloud at about 183 words per minute. Five minutes at that rate is 915 words, so a script of around 900 words is a reasonable ceiling for a 5-minute slot.
A speech is rarely delivered at a steady reading-aloud pace, though. You pause for emphasis, wait for laughter, click to the next slide and slow down for key points. That is why many speakers plan with a lower rate, somewhere around 130 to 160 words per minute. At those rates a 5-minute speech is about 650 to 800 words. Those lower rates are planning assumptions, not measured averages: the only reliable way to know your own pace is to time yourself (see below).
Speech length chart
Words you can fit into a speech of a given length, at three different paces:
| Speech length | Slow, many pauses (130 wpm) | Relaxed (160 wpm) | Reading aloud (183 wpm) |
|---|---|---|---|
| 1 minute | 130 | 160 | 183 |
| 2 minutes | 260 | 320 | 366 |
| 3 minutes | 390 | 480 | 549 |
| 5 minutes | 650 | 800 | 915 |
| 7 minutes | 910 | 1,120 | 1,281 |
| 10 minutes | 1,300 | 1,600 | 1,830 |
| 15 minutes | 1,950 | 2,400 | 2,745 |
| 20 minutes | 2,600 | 3,200 | 3,660 |
| 30 minutes | 3,900 | 4,800 | 5,490 |
For any other length, multiply the minutes by your speaking rate. A 45-second introduction at 150 words per minute, for example, is about 110 words.
Which pace should you plan for?
Think about how the words will be delivered:
- Read word for word from a script, as in a recorded voice-over or a formal statement: plan closer to the reading-aloud rate.
- Presented with slides, where you explain, point and move between screens: plan on the slower end, because transitions take time that the word count doesn’t show.
- Toasts, eulogies and ceremony speeches: plan slowly. Emotional moments, laughter and applause all add time.
- Technical talks, large rooms or audiences listening in a second language: slow down so people can follow, and budget fewer words.
Many people also speak faster when they are nervous, so a talk that ran five minutes in rehearsal can finish early on stage. A small buffer protects you either way.
Measure your own speaking rate
You only need a stopwatch and a short passage:
- Pick about 300 words of your own script.
- Read it out loud at the pace you would use in front of an audience, including pauses.
- Divide the word count by the time in minutes. For example, 300 words in 2 minutes 10 seconds is 300 ÷ 2.17 ≈ 138 words per minute.
Use that number instead of a general average. In the counter below, open Advanced and set the Speaking rate to your own pace; the speaking time for your whole script then updates as you edit.
Tips for writing a speech to time
- Leave a buffer. For a strict 5-minute slot, write for about 4½ minutes. At 150 words per minute that is around 675 words.
- Count only what you will say. Remove stage directions, slide titles and notes to yourself before you check the length.
- Watch numbers and abbreviations. “2026” counts as one word but takes three spoken words (“twenty twenty-six”). Figures, dates, URLs and acronyms take longer to say than their word count suggests.
- Plan Q&A separately. Questions are impossible to time precisely, so keep them outside the word budget for your prepared remarks.
- Rehearse with a timer. Word counts get you close; one full run-through tells you the truth.
Typical slots in words
As a starting point at a relaxed 150 words per minute:
- 30-second elevator pitch: about 75 words
- 2-minute self-introduction: about 300 words
- 3-minute competition talk: about 450 words
- 5-minute class presentation or toast: about 750 words
- 10-minute presentation: about 1,500 words
- 20-minute conference talk: about 3,000 words
Paste your draft into the counter below to see its word count and estimated speaking time side by side. The speaking time uses 183 words per minute by default, the read-aloud average from Brysbaert’s meta-analysis, and you can change it to match your pace. If you also want the silent reading time, the same view shows it, and our guide to how long it takes to read explains the reading rates.